Analogues of imported chains
Russian replacements for imported chains: DIN/EN/ISO ↔ GOST/TU, selection by standard, size and load, documents.
The correspondence of standards is provided for reference and is clarified by a technologist for a specific task and size. We use the wording «analogue/replacement», without third-party trademarks.
What to replace the DIN 766 chain withRussian replacement for the short-link calibrated DIN 766 chain — chains to GOST 2319-81 and our TU 25.93.17-001-06515248-2020 (strength class 3). Selection by gauge, pitch and load.MoreAnalogue of DIN 763 chainRussian replacement for the long-link DIN 763 chain — long-link welded chains of normal strength to GOST 2319-81, manufactured to our TU 25.93.17-001-06515248-2020 (TU-001, class 3). Selected by gauge and pitch.MoreT8 chain — analogue of DIN 818-2 / EN 818-2 (class 8)Russian replacement for the DIN 818-2 / EN 818-2 lifting chain (class 8, T8/G80) — GOST EN 818-2-2017 and our TU-002. Selection by load and size.MoreAnalogue of DIN 5685 chainRussian replacement for DIN 5685 utility chains (long-link and short-link forms) — welded round-link chains to GOST 2319-81 and our TU 25.93.17-001-06515248-2020 (class 3). Selected by gauge and pitch.MoreAnalogue of DIN 764 chainA close match for the calibrated DIN 764 chain (class 3, pitch 3.5d, for chain conveyors) — short-link calibrated chains to GOST 2319-81 and our TU 25.93.17-001-06515248-2020. The conformity is clarified by a technologist.MoreAnalogue of DIN 762 chainA close match for the long-link DIN 762 chain (pitch 5d, classes 3 and 5; traction chains for chain conveyors) — long-link class 3 chains to our TU 25.93.17-001-06515248-2020. The conformity is clarified by a technologist.MoreAnalogue of EN 818-1 — general requirements for lifting chainsEN 818-1 is part 1 of the EN 818 family (general conditions of acceptance for short-link lifting chains). The Russian basis is GOST EN 818-1-2017; for class 8 — GOST EN 818-2-2017 and our TU 25.93.17-002-06515248-2026 (T8).MoreChains to GOST 30188-97 — our T8 line (TU-002)GOST 30188-97 is the standard for calibrated high-strength lifting chains of class T(8). Our line is T8 chains to TU 25.93.17-002-06515248-2026 (the same purpose and the same system of standardised loads).More